Filter
Top Products
30
Imprinting the Date or Time (DATE Model only)
Setting the Date and Time
1
Move the < > arrow to < >.
•
Look at the LCD panel and press the
< > button.
If the date and time has not been set,
“ ” will blink on the LCD panel.
2
Select the digit to be set.
•
Press the
<>
button.
•
The digit selection will change in the
following sequence: year, month, day,
hour, minute, “ ”.
3
Set the correct number.
•
Turn the < > dial.
•
Repeat steps 2 and 3 until all the
date and time digits are set correctly.
4
Finalize the date and time setting.
•
Keep pressing the < > button until
no digits are blinking.
•
If you press the < > button while
“ ” is blinking, 0 sec. will be set.
The date and time setting can be retained for about 10 min. after the cam-
era’s batteries are removed.
If a picture is taken while the date and time are blinking, the date and time will not
be imprinted on that picture.
NNN E SEC2 (21-30) 02.5.11 11:15 AM Page 30