Canon HFS30 Camcorder User Manual


 
134 External Connections
4 Copy the photos.
* Touch [Stop] to interrupt the operation while it is in progress.
IMPORTANT
Observe the following precautions while the ACCESS indicator is on or
flashing. Failing to do so may result in permanent data loss.
- Do not open the double memory card slot cover.
- Do not disconnect the power source or turn off the camcorder.
- Do not change the camcorder’s operating mode.
When copying photos onto an Eye-Fi card in memory card slot Y, pho-
tos will be uploaded automatically if you are within the range of a config-
ured network. Always verify that Eye-Fi cards have been approved in
the country/region of use. See also Using an Eye-Fi card (0 146).
NOTES
In the following cases, you will not be able to copy recordings to the
memory card:
- If the double memory card slot is open.
- If the LOCK switch on memory card Y is set to prevent writing.
- If there is no memory card in memory card slot Y.
Scenes that were edited using the supplied software VideoBrowser
and were then transferred back to the camcorder cannot be copied to
the memory card.
If there is not enough space on memory card Y, as many photos as
possible will be copied before stopping the operation.
Saving Recordings on a Computer
Movies recorded with this camcorder are saved in the built-in memory
or on the memory cards. Because space is limited, make sure to save
your recordings on a computer on a regular basis.
Carefully read the information in SDXC Memory Cards (0 38) before
performing the procedure using recordings made on an SDXC memory
card.
[Edit] 8 [Copy (f97)] or [Copy (497)] 8 [Yes]* 8
[OK]
COPY