Filter
Top Products
External Connections 141
IMPORTANT
• While the camcorder is connected to the computer, do not open the
double memory card slot cover and do not remove the memory cards.
• Observe the following precautions while the ACCESS indicator is on or
flashing. Failing to do so may result in permanent data loss.
- Do not open the double memory card slot cover.
- Do not disconnect the USB cable.
- Do not disconnect the compact power adapter or turn off the
camcorder or the computer.
Copying Recordings to an External Video Recorder
In High Definition
Connect the camcorder to AVCHD-compatible digital video recorders
to make perfect copies of your movies in high definition. If the external
digital video recorder has an SD memory card slot, you can use the
memory card to copy your movies without connecting the camcorder.
Details will vary depending on the device used so be sure to refer to
the instruction manual of the digital video recorder.
In Standard Definition
You can copy your movies by connecting the camcorder to a VCR or a
digital video recorder with analog audio/video inputs. Video output will
be in standard definition, although the original scenes are in high defi-
nition.
Connecting
Connect the camcorder to the VCR using Connection C. Refer to
Connection Diagrams (0 129).
Recording
1 External device: Load a blank cassette or disc and set the device
to record pause mode.
2 Turn on the camcorder and set it to mode.
Verify that 6
8 [AV/Headphones] is set to [H AV].
Operating modes:
COPY