Filter
Top Products
Video 87
NOTES
• When the audio level meter reaches the red point (0 dB), the sound may
be distorted.
• If the audio level is too high and the sound gets distorted, activate the
microphone attenuator with the 7 8 [Microphone Attenuator] set-
ting (or [Surround Mic Attenuator] when the optional SM-V1 Surround
Microphone is attached to the camcorder).
• We recommend using headphones to check the sound level while
adjusting the audio recording level or when the microphone attenuator
is activated.
• This function can also be assigned to the custom key/dial (
0 91).
Using Headphones
Use headphones for playback or to check the audio level while record-
ing. The headphones are connected to the AV OUT/X terminal, which
is used for both the headphones and the audio/video output. Before
connecting the headphones, follow the procedure below to change the
function of the terminal from AV output to X (headphones) output.
* Headphones can be used also in mode but the function of the terminal can-
not be changed in this mode. Change the setting in advance in one of the other
operating modes.
* Only when performing the procedure in mode.
• J appears.
Operating modes:
*
[FUNC.]* 8 [MENU] 8 6 8 [AV/Headphones] 8
[Headphones] 8
To close the menu: 8 [a]
To continue adjusting the volume:
8 [f] 8 [Volume] 8 Drag your finger left and right along
the volume bar to adjust the volume 8 [a]
COPY