Filter
Top Products
External Power Sources
~~1
Macro Ring Lite MR-14EX can use either of the following two external
power packs. For details
on
the power pack, refer to the Instructions of the
respective power pack.
(1) Compact Battery Pack CP-E2
Uses six size-AA alkaline, nickel-hydride, or lithium batteries.
(2) Transistor Pack E
Uses Battery Magazine TP (six size-C alkaline batteries) or Ni-Cd
Pack TP.
Recycling Time and Flash Count
(Applicable to both
or
only one flash tube tiring)
Power Source
Recycling
Flash Count
Time
(sec.)
Internal
Power
Size-AA alkaline batteries Approx.0.1-7
Approx.120-800
Sources
Compact Battery Pack
CP-E2
Approx.0.1-4
Approx,
400-2500
External
Power
(w/alkaline batteries)
Sources
Transistor Pack E (w/alkaline batteries) Approx.0.1-4
Approx.
400-2500
Transistor Pack E
(wiN
i-Cd Pack TP) Approx. 0.1-3
Approx.
330-2000
• The minimum recycling time applies
in
the E-TTL or
TIL
mode while the
maximum recycling time applies
in
the manual
or
full-output (1/1) mode.
• The minimum flash count applies in the manual or full-output (1/1) mode
while the maximum flash count applies
in
the
E-TIL
or TTL mode.
• The above specifications are based on Canon's testing standards.
..
-Evenwhen
an~xternal
power source isused, batteries must still
be
installed
in
tbeMR-14EX to power
its
internal circuitry.
-TheMR-14EX
usesboth the internal and external power sourcesto recycle
the flash. Therefore,.the.internalpower source.
may
become exhaustedsooner
thanthe
externalpow~rso~
rce.
ForproI5m~edflash·
photography,keep a spare
set
of·
size-AAbatteries handy fortheinternal.power source.
12