Filter
Top Products
Using the Wireless Flash System
rJIIIIIJm
nu
~I~~
Using Slave C (w/EOS-10, 1V,
3,
030, ELAN
7nE,
or
30/33)
You can fire flash tubes A and B and slave C at the same time. A correct
flash exposure is obtained with flash tubes A and B together, and slave C
alone is set automatically to obtain a correct exposure. Slave C is used to
eli"minate background shadows or to create accent lighting.
Imiml A : B C
+0
:~D
8:1-
4:1-2:1-
~
-1:2-1:4-1:8
at:
Check
that
Imiml
A : B C
is
displayed on the LCD
panel_
•
If
it
is
not displayed, press the <RATI0 >
button until it
is
displayed. (-7p.42)
Check
that
the master
unit's
pilot
.
lamp
is
lit
and
that
slave C
is
also
flash-ready.
Focus and take the picture.
Check that the master unit's flash
exposure confirmation lamp lights.
_ With Type-A cameras,
C.
Fn-5 can have both the master unit and slave unit
fire together as one group.
(~p.64)
• While Imiml is not displayed on the master unit, you can just position the
slave unit as desired. .
45