Canon MR-14EXl Camera Flash User Manual


 
FI
as
h Dislan
ce
Ran
9e '
..
'fI.llmillJ'rJllllllllIIIIIIIIIJIIIIIIIJIJJIII8IIIJIIIJ
The
MT
-24EX's effective flash distance range greatly depends on the
position and angle of the flash heads. For best results, point the flash
heads directly at the subject and use FE lock
(~
p.30) and modeling flash
(~
p.29, 55).
When the correct flash exposure is obtained, the flash exposure
confirmation lamp lights
(~
p.16).
The MT-24EX has nine Custom Functions from C.Fn-1 to C.Fn-9.C.Fn-1 to
C.Fn-7 are the same as the MR-14EX's
(~
p.65), and C.Fn-8 and C.Fn-9
are described below.
Custom Function Settings
Function
Custom
Setting
Description
Function
No.
No
Flash ratio control increments
0
1/2-stop
C.Fn-8
1
Full-stop
Focusing
lamp
on/off
by
double-
0
Disabled
clicking the shutterbutton halfway
C.Fn-9
1
Enabled
C.Fn-9: Setting this to
"1"
enables you to turn on/off the focusing lamp by double-clicking
the shutter button halfway. This
is
convenient when both of your hands are busy. I
The clicking interval differs slightly depending
on
the EOS camera.
(The clicking interval cannot
be
adjusted.)
83