Filter
Top Products
With Type-A cameras, you can set
FE
(flash exposure) lock. This is the
flash version of AE lock. With
FE
lock, you use spot metering to obtain the
correct flash exposure reading for a specific area of the subject.
* The flash mode must be set to ETTL.
Select a
shooting
mode
with
the
camera.
Focus the subject.
~
FEL
5.b
30
Aim the viewfinder's
spot
metering circle over the area
of
the sUbject
to
be metered. Then
press the
<
FEL
> button on the
camera.
FE
lock
remains in effect
for
16 sec.
~
The MR-14EX fires a preflash to
obtain an exposure reading. The
reading is retained temporarily
in
memory.
~
FEL
is displayed on the viewfinder
bottom for 0.5 sec.
• You can obtain a new
FE
lock
reading by pressing the <
FEL
> button
again.
• To cancel FE lock, wait until 16 sec.
elapse or press the
<MODE>, <AF>,
or <
~
> button on the camera.
Focus the subject.