Using Flash with the Camera's Shooting Modes
In
this mode, you set both the shutter speed and aperture. The
E-TTl
autoflash system controls the flash exposure based on the aperture you
set. The proper exposure of the background is set with both the aperture
and shutter speed.
M
D
)
Set the camera's shooting mode
to M and set the aperture and
shutter speed.
• Set the desired aperture and the
shutter speed anywhere from 30 sec.
to the top sync speed. You can also
use
bulb.
Set the MR-14EX's flash mode to
ETTL.
~
bO
s.b •
Focus and take the picture.
• Check that the t icon (flash ready) is
displayed
in
the viewfinder before
taking the picture.
24