Filter
Top Products
Attaching
the
Control
Unit
to
the
Camera
",
....
Loosen the locking collar by
turning it as shown by the arrow.
Slip the Control Unit's mounting
foot into the camera's hot shoe all
the way.
Turn the locking collar as shown
by the arrow and tighten.
~
The mounting foot's locking pin will
also extend into the hot shoe.
• To detach the Control Unit, turn the
locking collar
in
the opposite direction
until it stops. (The locking pin retracts
into the mounting foot.) Then slip it
off the hot shoe.
I
13