Filter
Top Products
Wireless Manual Flash
.~lj.I~
•••
III.I~.I~i.I~I.I~".H.·~~~~
•••••
~
---
With all Type-B cameras, you can also set up a wireless manual flash
system.
* To set up a wireless flash system, follow the same procedure for Type-A cameras
on page 42 to 44.
* W"ireless autoflash is not possible.
Setting the flash output for flash tubes A and 8 and slave C
With
IimiM
A : B : C displayed
on
the master unit, set the flash output for flash
tubes A and
B.
Then set the flash output for slave
C.
For the setting
procedure, see "Firing Both Flash Tubes at a Different Output" on page 61.
__
With all Type-B cameras, C.Fn-5 can set the same flash output for flash
tubes A and B and slave
C.
(~p.64)
• While
IimiM
is not displayed on
the.
master unit, you can just set the flash
output with the master unit.
Group C
When C.Fn-5-1 is set, you can use
additional Speedlites and set their slave
IDs to
A,
B,
or
C.
(~p.65)
By having multiple Speedlites set to the
same slave I
D,
you can create a slave
group to produce a brighter flash. For
example, a slave unit whose slave
ID
is
A will fire together with flash tube
A.
Each slave group is treated as one
Speedlite, with the same flash settings
applied to all the Speedlites
in
the group.
There is no limit as to the number of
slave units that can belong to one group.
Flash tube B Flash tube A
63