Filter
Top Products
In
the manual flash mode, you can set the flash output from
1/1
(full) to 1/64
power
in
whole-stop increments. The flash tubes can be fired in one of three
configurations: 1. Fire both flash tubes at the same output,
2.
Fire flash tube
A at a different output from flash tube
B,
3.
Fire only one of the flash tubes.
Set the camera's
shooting
mode
to
Av
or
M.
Press the MR-14EX's
<MODE>
button and select
M.
~
Pressing the
<MODE>
button
toggles the flash mode between
ETTL
and
M.
C
ETTL
---+
M~
Press the <
SEUSET
> button.
~
The flash output display blinks.
Press the < + >
or
<- > button
to
set
the desired flash output.
~
Each
time
you
press
the
button,
the
flash
output
increases
or
decreases
by
one
stop.
Press the <
SEUSET
> button again.
~
The flash output is displayed.
Set the camera's aperture.
Focus and take the picture.
• Check that the J icon (flash ready) is
displayed in the viewfinder before
taking the picture.
38