Filter
Top Products
VIEWING IMAGES ON A COMPUTER
192
■ Establish a connection between the camera
and computer
1.
Make sure the camera’s battery is fully
charged.
2.
Turn on the camera, and then press [MENU].
• It makes no difference whether the camera is in a
REC mode or the PLAY mode.
3.
Select the “Set Up” tab, select “USB”, and
then press [̈].
4.
Use [̆] and [̄] to select “Mass Storage”, and
then press [SET].
• Take care when connecting the USB cable to the
camera or your computer. USB ports and cable plugs
are shaped for proper positioning.
5.
Turn off the camera, and connect the USB
cable that comes bundled with the camera to
the camera’s USB/AV connector and your
computer’s USB port.
USB port
Connector A
USB cable
USB/AV
connector
Make sure that the side of the connector
that is marked with an arrow (
̆
) is facing
in the same direction as the front (lens
side) of the camera.