Filter
Top Products
APPENDIX
227
1) Clean the lens.
2) Make sure the subject is centered in the focus
frame when composing the image.
3) Use manual focus (page 80).
4) Turn on Anti Shake or mount the camera on a
tripod (page 94).
When composing the image, make sure the
subject on which you want to focus is located
inside the focus frame (page 52).
1) When composing the image, make sure the
subject on which you want to focus is located
inside the focus frame (page 52).
2) Change the focus mode to “
” (Auto Focus,
page 75) or “
” (infinity, page 79).
3) Change the BEST SHOT scene to “Scenery”
(page 89).
1) Select a different flash mode (page 63).
2) Charge the battery (page 31).
3) Select a different flash mode (page 63) or
BEST SHOT scene (page 89).
1) The lens is dirty.
2) The subject is not located in the center of the
focus frame when you compose the image.
3) The subject you are shooting is a type that is
not compatible with Auto Focus operation (page
58).
4) You are moving the camera.
The image is not focused properly.
1) The image is not focused properly.
2) The wrong focus mode is selected.
3) The wrong BEST SHOT scene is selected.
1) “
” (flash off) is selected as the flash mode.
2) The battery is dead.
3) A scene that selects “
” (flash off) as the
flash mode is selected in the BEST SHOT
mode.
Auto Focus does not focus
properly.
The subject is out of focus
in the recorded image.
Scenery shots are out of
focus.
The flash does not fire.
Image Recording
Symptom Possible Cause Action