Casio EX-Z77 Digital Camera User Manual


 
154
VIEWING SNAPSHOTS AND MOVIES
4. Now you can perform the applicable operation
on the camera for the type of file you want to
play.
To turn off the camera
You can turn off the camera by pressing the camera’s [ON/OFF]
button.
IMPORTANT!
When connecting to a TV to display images, be sure to
configure the camera’s [ ] (REC) and [ ] (PLAY)
buttons for “Power On” or “Power On/Off” (page 199).
All icons and indicators that appear on the monitor screen
also appear on the TV screen.
You can use [S] (DISP) to change the display contents.
Audio is monaural.
Certain TVs may cut off part of the images.
Audio is initially output by the camera at maximum volume.
When you first start displaying images, set the TV volume
control at a relativ ely low level and then adjust it as
required.
NOT
E
You can use the camera to connect to a DVD recorder or
video deck and record images from the camera. There are
various different methods you can use in order to connect
to another device when recording images. The following
describes one method for connection using the AV cable
that comes with the camera.
DVD recorder or video deck: Connect to the VIDEO IN
and AUDIO IN terminals.
Camera: Connect to the USB/AV connector
You can play a slideshow of snapshots and movies on the
camera and record it on a DVD or video tape. You can
record movies by selecting “ Only” for the slideshow
“Images” setting (page 149). When recording to DVD
recorder or video deck, you can turn off display information
(page 56) so indicators and other information is not
recorded along with the image.
To view the image that is being recorded, connect a TV or
other monitor to the DVD recorder or video deck that is
connected to the camera. For information about connecting
a monitor to the DVD recorder or video deck and about how
to record, see the user documentation that comes with the
DVD recorder or video deck you are using.