Filter
Top Products
37
Using the DCS-5300 with an Internet browser
(continued)
Configuration > Advanced > Mail & FTP (Continued)
FTP Settings
1st FTP server -
If the DCS-5300 is located inside a network that
is protected by a firewall, a data connection for
FTP may be prohibited. Passive mode FTP can
bypass this rule and allow the uploading of
snapshots. If the passive mode is selected, the
DCS-5300 can automatically attempt to upload
in active mode if the external FTP server does
not support passive mode.
Granted folder on the external FTP server. The
string must conform to the external FTP server.
Some FTP servers cannot accept a preceding
slash symbol before the path if there is no virtual
path mapping. Refer to the instructions of the
external FTP server for details. The folder privilege
must be open for upload.
1st FTP remote folder -
Granted password on the external FTP server.
Granted user name on the external FTP server.
1st FTP user name -
The domain name or IP address of the external
FTP server. The following user settings must be
correctly configured for remote access.
It can be other than default port 21. If you find that
you want to change the port to a port number
other than 21, you will need to specify the port
when connecting to the FTP server. For example
FTP://68.5.1.81:60 (if you are to use port 60 for
your FTP server port)
Local FTP server port -
1st FTP password -
Primary FTP Passive
Mode-