Filter
Top Products
20D-Link DNR-326 User Manual
Section 3 - Conguration
Network Setup
DHCP:
Static IP:
IP Address:
Subnet Mask:
Gateway IP
Address:
DNS1:
DNS2:
PPPoE Settings:
DHCP server:
Select this connection if you have a DHCP server running on your
network and would like a dynamic IP address to be automatically
updated to your NVR.
You may obtain a static or fixed IP address and other network
information from your network administrator for your NVR. A static IP
address will simplify access to your NVR in the future.
The fixed IP address.
The default value 255.255.255.0 is used to determine if the destination
is in the same subnet.
The gateway forwards frames to destinations in a different subnet.
Invalid gateway settings may cause the failure of transmissions to a
different subnet.
Primary domain name server that translates names to IP addresses.
Secondary domain name server to backup the primary one.
Enable this setting if your ISP (DSL service) is using PPPoE. You may
already have a Username and Password provided by your ISP, or you
may need to contact your ISP. The connection status will be determined
automatically by the system.
Enable or disable the DHCP server. If your network doesn’t have DHCP
server, enable NVR DHCP server for easier local network setup.
Network Setup allows you to configure the LAN settings for your NAS device.