Filter
Top Products
25D-Link DNR-326 User Manual
Section 3 - Conguration
Live and Playback Setup
Port:
Maximum
Connections:
Enter the live streaming transmission port.
Enter the maximum number of connections for remote access. The maximum
number allowed is 36.
Note: When setting Maximum Connections in Live Streaming Server settings, 1 connection means that 1 user can connect to 1 camera only. If
the maximum number of connections is 16 and if each user connects to 4 cameras, then the maximum number of connected users is 4 and not
16.
Port:
Maximum Users:
CMS Server:
Emap:
Allowed/ Blocked
List:
Enter the playback transmission port.
Enter the maximum number of users who can access playback functions at
the same time. The maximum number of users for the playback server is 8.
The NVR supports 3rd party* CMS (Central Management System). It is able to
be connected to CMS as a client.
CMS Server: Check the Enable option to enable CMS service.
Port: The port number through which the CMS connects to this NVR.
Maximum Connections: The maximum number of allowed CMS connections.
Note: For detailed 3rd party information, please contact your local D-Link
office.
You can upload map with your camera locations to the NVR. You can use a
BMP or JPG file up to 20 KB.\
Select whether you want to enable or disable the allowed and blocked lists:
Allowed List: IP addresses in this list can always access your NVR.
Blocked List: IP addresses in this list will always be blocked.
You can add an IP address to a list by entering the IP in the corresponding text
box and clicking its Add button.
Live Streaming Server
Playback Server