Filter
Top Products
22D-Link DNR-326 User Manual
Section 3 - Conguration
Camera Setup
Step 1: Select the camera which you would like to modify.
Step 2: Modify its information on the top of the page.
Step 3: Click Save Settings.
Step 4: If you would like to replace a camera, select that camera, modify
its address, port, user name, and password, and then click Save
Settings.
Camera Name:
Address:
Port:
Administrator
Name/
Password:
Camera
Channel:
Protocol:
Vendor:
Model:
Auto
Detection:
Enter a name to identify the camera.
Enter the camera’s IP address.
Enter the port used by your camera.
Enter the administrator name and password used to log in to the
selected camera.
Enter which channel this camera should use.
Select which protocol this camera should use.
Select a manufacturer from the dropdown list.
Select a model from the dropdown list.
If you have already entered the camera IP, you may simply click this
button to try to automatically detect camera information (such as the
channel, protocol, vendor, and model number).
Note:
Some cameras will limit the login authority to the administrator only.