Filter
Top Products
35D-Link DNR-326 User Manual
Section 3 - Conguration
If the NVR is malfunctioning or crashes unexpectedly, click Restart on
the NVR. Restarting the NVR will take about one and a half minutes.
This will reset all configurations to factory default.
This will shut down the NVR.
All the configurations can be saved as a file to the specified location.
Click Save to save the file to your local PC.
The user can restore the configuration file if they have reset the system
to the factory default file. Click Choose File to select the configuration
file and restore it by clicking Load.
When the administrator enters the Setup pages, except the Live Video
and Playback pages, the NVR will keep track of the idle time when there
is no action taken by the user.
After a certain period of time, it will then force the user to log out and
request the user to log in again for security concerns. Change the idle
time period here.
System
Restart:
Restore:
Shutdown:
Save
Configuration
Settings:
Load
Configuration
Settings:
Idle Time:
Users can save the NVR configuration to a file and restore it when necessary. Occasionally, restarting the NVR can keep the
system running smoothly. Reset the NVR to restore all configurations to factory default.