Filter
Top Products
40D-Link DNR-326 User Manual
Section 3 - Conguration
Shows the camera connection status. The user can click Connect or
Disconnect to change the connection status.
Shows the recording schedule and current recording status of the
cameras. Please note that if the camera is disconnected, the recording
may continue but will produce blank video.
Displays the frame rate of the camera.
Displays the transmission bit rate of the camera.
Note: If the Frame Rate or Bit Rate is too low, please check your network
configuration between the cameras and the NVR. If the bit rate is too
high, it will cause the Live Video display to slow or lag. Please modify
the quality or bitrate setting in the camera web GUI accordingly.
Shows the hard drive space and estimated remaining recording time
status.
Note: The recording time information is estimated by current bit rate.
This may change each time a user refreshes this page.
Status
Connection
Status:
Recording
Status:
Frame Rate:
Bit Rate:
Disk Status:
This page displays the connection and recording status of your cameras.
Camera Status