Filter
Top Products
18
Item Description
Time & Date
Displays current date and time. If the date and/or time is
incorrect, please correct it or the data recorded by this NVR
will become inaccurate when you need to review them.
You can correct date and time by System setup -> General ->
Time Setup menu.
Pan & Tilt
Controls the pan and tilt of remote IP cameras. Please note
that not every camera supports pan and tilt control, nothing
will happen when you try to control pan and tilt on these
cameras.
To move camera left, right, up, and down, just click on
corresponding button. To re-position the camera back to its
‘Home’ position (i.e. starting position), click the black circle
button in the center of pan and tilt control.
Single/Quad Display
To view the video of a certain camera only, click button.
To view the video of four cameras simultaneously, click
button.
Camera Select
Click on the dropdown menu to select a certain camera
to view from all of the cameras. To get the camera’s IP
address, you can move the move and stop on this icon:
Connect
Connect to selected IP camera and start playing video.
Disconnect
Disconnect from connected IP camera and stop playing video.
Snapshot
Take an image snapshot of current video stream. You will be
prompted to input the directory where you wish to save the
snapshot file.
Record
Start recording current video stream and save to a video file.
You will be prompted to input the directory where you wish to
save the video file.
Digital Zoom
Enable digital zoom to enlarge video from camera, so you can
see some certain objects in detail.
Fit the window size Display the video streams original size or fit the window size.