Filter
Top Products
7
(right)
(ICON 1): HDD 2 is online
(ICON 2): Accessing HDD 2
Power switch Switch NVR on/off
1: Switch NVR on
0: Switch NVR off
System reset (button)
Resets NVR when NVR is not working properly. Use a pen or
other sharp objects to press (10 seconds) the button inside the
hole to reset the NVR.
Power socket Connects to AC power adapter
Ethernet socket Connects to Ethernet cable
1.5 Setting up Your NVR
Please follow the following instructions to setup your new network video server. Please
prepare the following items in advance:
1 or 2 3.5” SATA HDD(s), maximum capacity 2TB
AC power outlet (AC 100V-240V)
IP address that will be assigned to this NVR
Note: the NVR does not support HDD hot-plug, please do not insert or remove HDD when
NVR is working. For such kind of inhibited action may cause HDD internal data to be
damaged.