Filter
Top Products
Setting Up the Document Camera
11
Connecting to a Projector or
TV/Computer Monitor
You can connect the document camera to any projector or monitor
that has a standard RGB video or composite video input port.
EPSON projectors support both connections. Most computer
monitors support only RGB video, while many television monitors
support composite video. Follow the instructions below to connect
the document camera to your output device with an RGB video cable
or an RCA cable.
Connecting the RGB Video Cable
Before you start, make sure your document camera and projector or
computer monitor are turned off.
1. Connect one end of the RGB video cable to the document
camera’s
RGB OUT
port.
2. Connect the other end of the RGB video cable to the RGB video
input port on the projector or computer monitor.
3. Tighten the screws on the connectors.
note
The RGB video input port on
the projector or monitor may
be labeled “computer,” or
“video in.”
AC IN
RGB IN
RGB OUT
ON
OFF
RS-232C
POWER
VIDEO
OUT
USB
0
1
A
B
C
or
projector
monitor
RGB OUT
elpdc04.book Page 11 Tuesday, February 12, 2002 8:32 AM