Filter
Top Products
Using the Document Camera
21
Adjusting the Lighting
If you are presenting printed material or 3-D objects, the two upper
lamps provide ample light. If the ambient lighting in the room is
sufficient, however, you may obtain a better image with the upper
lamps off.
Press the
Lamp
button on the remote control to turn off the lamps
one at a time from right to left (when facing the unit’s control panel).
Press it a third time to turn the lamps back on. There will be a slight
delay before the lamps turn back on.
Turn upper lamps
off or on
elpdc04.book Page 21 Tuesday, February 12, 2002 8:32 AM