Filter
Top Products
Using the Document Camera
19
Once you see your image, turn to page 22 for instructions on making
adjustments.
If your image doesn’t appear, see the next section for help.
When you’re done with your presentation, turn off the document
camera as described on page 27.
What To Do If You See a Blank Screen
If an image doesn’t appear, try the following:
■
Make sure the cables are connected correctly, as described on
page 11 for a projector or monitor or page 13 for a computer.
■
Make sure everything is turned on.
■
Make sure the lighting unit lamps are on.
■
If you are using a video source, such as a laptop or desktop
computer, you may need to switch video sources. Press the
RGB1
button as shown on page 20.
■
If an image still doesn’t appear, refer to Chapter 4 for more help.
note
If you turn off the document
camera, always wait a few
seconds before turning it
back on.
elpdc04.book Page 19 Tuesday, February 12, 2002 8:32 AM