Filter
Top Products
22 Printing From Start to Finish
7. Choose the paper Source in which you loaded your paper:
■ Sheet: for sheets of paper loaded in the sheet feeder.
■ Roll Paper: for photos or panoramics up to 27 inches (68.6 cm) long. If
desired, click
Print page frame to print a cutting guideline around each
photo.
■ Roll Paper - Banner: for photos or banners over 27 inches (68.6 cm)
long. If desired, click
Save Roll Paper to feed small amounts of roll
paper between each banner.
■ Manual - Roll: for a sheet of compatible paper loaded in the single sheet
guide (see page 8 for loading instructions).
■ Manual - Front: for thick media loaded in the front manual feed slot (see
page 14).
■ CD/DVD: for a disc loaded in the CD/DVD tray guide (see page 31 for
printing instructions).
8. Select the paper
Size setting for the paper you loaded.
If you loaded roll paper or canvas media, create a custom paper size. Select
User Defined in the Size menu, then click the User Defined button. Type a
name for your custom size. For the Paper Width, enter
8.3 for A4- or 12.95
for Super B-size rolls. For the Paper Height enter the desired length up to
44 inches. Click
Save, click OK, then select your custom paper size in the
Size menu.
Note:
For roll paper, make sure the maximum width of your photo is 8.3 or 13 inches to fit
in the width of your roll paper (set the margins to 0 in your application software).
9. If you’re printing borderless photos, select Borderless, if available. To adjust
the borderless expansion setting click
Expansion.
10. To reduce or enlarge your printout or print double-sided, click the
Page
Layout
tab and select settings as necessary. (Click Help or see your on-screen
Reference Guide for details.)
Note:
For color management instructions, see http://www.epson.com/SPR2880Profiles.
For more information about print settings, click Help or see your on-screen
Reference Guide.
11. Click OK to save your settings.
12. Click
OK or Print to start printing.
spr2880_ug.book Page 22 Monday, April 6, 2009 1:10 PM