Filter
Top Products
Printing From Start to Finish 27
Printing With Mac OS X 10.3 to 10.4
1. Open a photo or document in a printing program, open the File menu, and
select
Page Setup.
2. Select
Stylus Photo R2880 as the Format For setting.
3. Select the
Paper Size setting for the paper size and source you are using:
■ To print a borderless photo on paper loaded in the sheet feeder, select a
paper size with a
Sheet Feeder - Borderless option.
■ To print on roll paper or canvas media, create a custom paper size.
Select Manage Custom Sizes in the Paper Size pop-up menu. Click
the + (plus sign), double-click
Untitled and give your paper size a name.
For the Width, enter
8.3 for A4- or 12.95 for Super B-size rolls. For the
Height enter the desired length up to 44 inches. Set the margins to
0 and
click
OK. Then select your custom paper size in the size menu.
Note:
For roll paper, make sure the maximum width of your photo is set to 8.3 or
13 inches to fit in the width of your roll paper (set the margins to 0 in your
application software).
■
To print on paper loaded in the single sheet paper guide, select a paper
size with a
Manual - Roll or Manual - Roll (Borderless) option.
■ To print on paper loaded in the front manual feed slot, select a paper size
with a
Manual Front option.
4. Choose portrait or landscape as the Orientation setting for your document or
photo.
5. Click
OK.
6. Open the
File menu and select Print.
Select Stylus Photo R2880
Select your Paper Size
Select your document
or image orientation
spr2880_ug.book Page 27 Monday, April 6, 2009 1:10 PM