Filter
Top Products
32 Printing on CDs and DVDs
Loading a CD or DVD
1. First burn files, music, or video onto your CD/DVD before printing on it to
prevent errors.
2. Turn on the printer.
3. Clean the rollers inside the printer (see page 31).
4. Remove any paper loaded in the sheet feeder and remove the single sheet
guide, if it is installed. Also close the paper support.
5. Open the output tray, but do not pull out the extensions.
6. Open the front manual feed slot cover and slide the edge guide left.
7. Place your disc on the CD/DVD tray with the label side up.
12-cm discs 8-cm discs
spr2880_ug.book Page 32 Monday, April 6, 2009 1:10 PM