Filter
Top Products
10
7.4. Connection of Pelco-D / -P protocol-compatible devices
Basic functions of speed domes and telemetry receivers compatible to Pelco-D / -P protocol can be
controlled with the EKB 500 keyboard if a simplex RS-485 connection option is provided. For general
connection, please refer to the chart illustrated above.
Applied protocol type: Pelco-D / Pelco-P (in accordance with dome / receiver)
ATTENTION: Some Pelco-D / -P protocol domes and receivers require an address offset of -1 at the
keyboard, i.e. the address assigned to the dome / receiver in the EKB 500 menu must be 1 below the
address set in the dome / receiver itself!