Filter
Top Products
28
Back to home if no
action for ___Minute
Move to home position
[ENT] to confirm
Auto Back Enabled
[ ] to toggle
Speed:___[1-239]
[ENT] to start.
Position A
Dwell:___[1-239]
Move to Position B
[ENT] to confirm
Position B
Dwell:___[1-239]
Speed:___[1-239]
[ENT] to start.
Start preset
POSITION > enter preset number > Enter
9.2.1.3. Home position
The home position is the position (preset) which is approached after a pre-defined duration upon last
speed dome operation.
Set (hold) + HOME
> enter inactivity duration 1 ~ 999 minutes
> Enter
Use the joystick to approach the requested position
> Enter
Use the JOYSTICK to activate the HOME function.
9.2.1.4. Autopan
End stop definition
Set (hold) + A.Pan
Use the joystick to approach the requested position A,
enter the dwell time at this end stop in seconds
(1 ~ 239) > Enter
Use the joystick to approach the requested position B,
enter the dwell time at this end stop in seconds
(1 ~ 239) > Enter
Activate A-B autopan
A.Pan > enter pan speed 1~ 239
> Enter
Activate 360° autopan
A continuous 360° pan operation is also possible.
Shift (hold) + A.Pan
> enter pan speed 1~ 239 >ENTER
Camera:0001 go to
Position:___[1-192]