Filter
Top Products
21
[ _ _ _ _ _ _ _ _ _ _ ] Pressed
[ Esc ] to exit
Shuttle : >>>> 5
Jog : 9934
Load default setting
Press [ ENT ] to load.
Input 123 to start
_
_ _ [ ENT ]
Input 123 to start
_
_ _ [ ENT ]
8.4.6. Keypad test
Use this menu for testing the keys’ functionality.
MENU > KEYBOARD SETTING > KEYPAD TEST > Enter
Press the keys to be checked.
If the keys work correctly, the LCD display shows the
key function in clear text.
Press Esc to return to menu.
8.4.7. Jog & Shuttle test
Use this menu for testing the jog/shuttle’s functionality.
MENU > KEYBOARD SETTING > JOG&SHUTTLE TEST > Enter
Move the shuttle (outer ring) towards the left and right
end stops. The display shows the 7 shuttle steps; reaching
the end stop, the display shows >>>>7 (right end stop)
resp. <<<<7 (left end stop).
Turn the jog to the left / right. If the jog works correctly,
the display counts from 0 to 9999.
Press Esc to return to menu.
8.4.8. Load default setting
Use this menu to reset the keyboard to default setting.
MENU > KEYBOARD SETTING > LOAD DEFAULT SETTING> Enter
Press Enter to confirm the default setting loading.
A second security dialogue appears.
Enter the figures 1, 2, 3 and press Enter to confirm.
Press Esc to cancel and return to menu.
After confirmation, all settings are deleted and the keyboard is reset to default setting. A short buzzer
blip confirms the reset.
8.4.9. Firmware update
This function allows the loading of new firmware upon availability. A PC with serial interface and an
uncrossed RS-232 connection cable (pin 2, 3, 5 interconnected) is required.
MENU > KEYBOARD SETTING > FIRMWARE UPDATE> Enter
A second security dialogue appears.
Enter the figures 1, 2, 3 and press Enter to confirm.
Press Esc to cancel and return to menu.