EverFocus EKB500 Digital Camera User Manual


 
24
CAM : 0001 MON : 0001
[ CAM / MON / DVR ]
9.1.3. Main monitor (MAIN) operation in DVR mode
The camera and monitor definition within the keyboard menu is irrelevant for the main monitor (MAIN)
operation.
As the operation is effected in DVR mode, CAM resp. MON switching is not necessary.
Select the camera by entering the channel number (DVR video input) via the numeric keypad. Key 1 is
delayed for approx. 1 second to enable input of channels 10~16.
All display options available for the respective DVR type are recallable through the keyboard (OSD, multi
screen displays).
ATTENTION: An additional camera switching by pressing CAM > camera number > Enter is required
for camera pan / tilt / zoom control.
9.1.4. Call and matrix monitor operation in CAM-MON mode
ATTENTION: The call and matrix monitor operation requires the definition of monitors and cameras
controlled by this keyboard in the keyboard menu. The keyboard only accepts camera-monitor
combinations connected to one digital video recorder.
Camera switching from active DVR mode
Press the CAM key, camera number is blinking.
Enter the camera number and press Enter to confirm.
Enter the monitor number and press MON for
Monitor selection.
Camera switching is effected.
Camera switching in active CAM-MON mode
If the keyboard already works in CAM-MON mode, a simplified operation is possible:
Syntax:
Camera number > CAM
Monitor number > MON
If the active camera (indicated in the display) shall also be displayed on other monitors, only the monitor
must be entered:
Monitor number > MON