Filter
Top Products
20
Release Joystick
and press [ ENT ]
Move joystick
to corners.
X+000 Y+000 Z+000
X-000 Y- OK Z-000
Buzzer Enabled
[ to toggle
Buzzer Disabled
[ to toggle
Input new Password :
_
_ _ _ _ _ _ _
Repeat Password :
_
_ _ _ _ _ _ _
Enable Lock Password
NO < [ ] to change
Setup menu password
set and enabled.
8.4.3. Lock password
If this password is activated, the keyboard will lock after 30 seconds with no keyboard operation.
Any keypress after locking will display a password inquiry at the LCD display.
MENU > KEYBOARD SETTING > LOCK PASSWORD > Enter
Enter an 8-character password.
Press Enter to confirm.
Repeat the password.
Press Enter to confirm.
For activating the password protection, use the
Joystick to select "YES"
and press Enter to confirm.
Lock password is active
8.4.4. Buzzer ON/OFF
MENU > KEYBOARD SETTING > BUZZER ON/OFF > Enter
Activate / deactivate buzzer.
Use the joystick for selection and press Enter to confirm.
8.4.5. Joystick calibration
MENU > KEYBOARD SETTING > JOYSTICK CALIBRATION > Enter
Use this menu for joystick calibration test.
Keep the joystick in idle position and press the Enter key.
Move the joystick towards all end stops including the
third axis (left/right rotation).
For all X, Y, Z displays, the end stop message must be “OK".
Press Esc to return to menu.