Filter
Top Products
29
9.2.1.5. Preset tours
The EPTZ series supports up to 16 programmable preset tours with up to 16 presets each.
For these tours, 2 operation modes are available:
1) Mode 1 (One way): after approaching all programmed presets, the tour restarts at the first
programmed preset.
Example: 1-2-3-4-5-6 > 1-2-3-4-5-6 > 1-2-3-4-5-....
2) Mode 2 (back and forth) > after approaching all programmed presets, the speed dome returns to the
presets in reverse order.
Example: 1-2-3-4-5-6 > 5-4-3-2-1 > 2-3-4-5-6 > 5-.....
Preset tour programming
Shift (hold) + Tour
> enter tour number 1 ~ 16 > Enter
Enter the presets in correct order (max. 16) .
Press Enter to save and add further preset tours.
Press Stop to finish preset tour programming.
Activation preset tour mode 1 (One way)
Tour
> enter tour number > Enter
Activation preset tour mode 2 (back and forth)
Shift (hold) + Tour
> enter tour number > Enter
Camera:0001
Run Tour:__[1-16]
Set Camera:0001
Tour:__[1-16]
Add Position#01:___
[ENT / STOP]
Tour:001 Pos#01:001<
[ENT] to save
Camera:0001
Run Tour:__[1-16]