Filter
Top Products
17
Total 005 Cameras
[ ENT ] to view list
Name RS485 DVR CH
0012 2- 0014
0002 03 <
DVR Name : _ _ _ _
RS485 Address:
_
_ _ _
DVR Type :
EDSR1600 <
DVR : 0000 set
[ ENT ] to save
Del Camera0000
[ ENT ] to confirm.
8.3.3. DVR Setting
Define the digital video recorders to be controlled by the keyboard in this menu.
DVRs can only be managed by EKB 500 after definition in this menu. By this, an administration of system
access rights can be set up, as only DVRs defined in this menu are available for access.
DVR number, entry 1 ~ 9999 (independent of
DVR RS-485 address).
Press Enter to confirm the setting and Esc to cancel.
Setup of the RS-485 interface to which the
DVR is connected, port 1 or 2.
Press Enter to confirm the setting and Esc to cancel.
DVR RS-485 address (complies with the
DVR menu RS-485 ID).
Press Enter to confirm the setting and Esc to cancel.
DVR type selection; list of all DVR types
supported by the keyboard.
Use the joystick to adjust the selection.
Press Enter to confirm the selection and Esc to cancel.
8.3.4. Camera List & Delete
This menu contains a list of all installed cameras as well as their settings. Furthermore, cameras can be
deleted here.
MENU > DEVICE SETTING >
CAMERA LIST & DELETE > Enter
After pressing the Enter key, the first camera is displayed.
Displays: RS-485: port number address
DVR: DVR to which the camera is connected
CH: DVR video input
Press Enter to delete the camera.
Press Enter again to confirm.
Press Esc to return to camera list.
ATTENTION: There is no automatic return to the camera list after deleting a camera; pressing
the Enter key again deletes the following camera.
Press Esc to return to camera list.
Use the joystick for camera switching.
Press Esc to cancel.
RS485 Connected to
Port : _ [ 1 or 2 ]