Filter
Top Products
English 34
OTHER SHOOTING FUNCTIONS
Using the flash
The flash is used not only for taking pictures where there is insufficient light,
but also when the subject is in shade or in backlight conditions. Your camera
has four modes of operation (automatic flash mode, forced flash mode, flash
off mode, and red-eye reduction mode). The flash is available only when
shooting still images.
1 Set the camera to the still image
shooting mode (see page 29).
h The current flash mode is shown
on the LCD monitor.
No icon: The digital camera will
detect the subject
brightness and use the
flash only when required.
In a backlight situation, if
only the center of the
image is very dark, the
flash will operate to
compensate (auto flash).
: The flash will operate with every image captured regardless of
the conditions. Use this setting under backlight conditions,
when the subject is in shade, under fluorescent lighting
conditions, etc. (forced flash).
: The flash will not operate even in dark situations. Use this
setting when capturing an image in a location where flash
photography is prohibited, or when shooting a night landscape
scene (flash off).
: The digital camera will detect the subject brightness and use
the flash only when required. At this time the flash will operate
in a manner that reduces the red reflection (“red-eye”) in the
subject’s eyes.
Flash mode