Filter
Top Products
55 English
CHANGING THE SHOOTING SETTINGS
Exposure Correction
When capturing images, you can make the image lighter or darker.
1 Cancel the Shooting Setting Screen
(see page 40).
h Press the MENU button to exit the
Shooting Setting Screen.
2 Press [l] or [m] on the arrow button.
h The exposure correction bar
appears.
h At this point, you can press [l] or
[m] on the arrow button to adjust the
exposure.
HINT
iExposure correction setting is canceled in the following cases:
When the pointer is set to the center position.
After the shooting mode is changed.
When the playback mode is set.
After the power is turned off.
iThe exposure setting numerical value is shown at the left end of the
exposure bar. The exposure can be set to a value from –1.8EV to +1.8EV.
iThe accessing indicator flashes when the exposure correction is active.
iYou can also correct the exposure by selecting the exposure correction
icon on the Shooting Setting Screen.
NOTE
When shooting without using the LCD monitor...
iExposure correction is disabled.