Filter
Top Products
87 English
DATE AND TIME SETTING
5 Set the order in which the date is
displayed during playback.
1Press the arrow button to select
“DISP”.
2Press the SET button.
h The Set Date Format Screen
appears.
3Press [n] or [o].
h When [n] is pressed, the
displayed date order changes as
follows:
Press [o] to change in the reverse order.
h If “DISP OFF” is selected, the date the image was captured is not
shown during playback.
4Press the SET button.
6 Select “EXIT”, and press the SET button.
h The date and time setting is completed, and you are returned to the
Option screen.
NOTE
iUnder normal conditions, while the battery is being replaced, an internal
battery will maintain the date and time settings. However, there is a small
chance the settings may be lost. (The backup will last for about 7 days.) It
is recommended to check that the date and time settings are still correct
after replacing the batteries and before shooting or recording of any type
(follow steps 1 and 2). Also, when the backup memory has failed and the
camera’s clock is not set, the clock alert icon appears.
To correct the date and time settings
iAfter steps 1 and 2, press [o] on the arrow button to select the line of the
setting that you want to change, and press [m] to select that setting. Then
press [n] or [o] to set the new setting.
CLOCK SET
DISP
YMD
year/month/day month/day/year day/month/year
DISP OFF (no display)