FOCUS Enhancements DR-DV5000 Camcorder User Manual


 
FireStore DR-DV5000 to any DV video
device such as a mixer, camcorder or deck.
Use FireStores random access capabilities
to navigate quickly from clip to clip without
having to spool forward and backward through
tape. Use FireStore DR-DV5000s trick
playback modes such as multi-speed fast
forward, incremental 1 frame per second
slow motion and reverse play to present
DV video in industrial, presentation or
scientific applications.
MOUNTING TO A CAMCORDER
The FireStore DR-DV5000 is designed to
mount directly to full size JVC Professional
DV camcorders. When mounted to JVC
GY-DV5000/ 5000E/ 5001 camcorders,
the DR-DV5000 hooks to the rear of the
camcorder in the usual position of the battery.
These camcorders and DR-DV5000 also
feature a 52-pin connector that allows unique
communication between both devices. To
mount to a Professional DV series camcorder,
do the following:
1) Remove and disconnect the attached
battery system from the camcorder. Consult
either your camcorders documentation or
documentation from your battery system for
more detailed information on removing the
battery system. Leave the rubber gasket that
was between the camcorder and battery
system in place.
2) If you are using a JVC GY-DV500, 550 or
700, you will first need to add the supplied
adapter plate to the rear of your camcorder
(this plate will allow the DR-DV5000 to
hook to the back of your camcorder.) Use
the supplied four screws to mount. GY-
DV5000 series camcorder owners can ignore
this step.
3) DR-DV5000 features a two wire connector
with black and red cables that connects main
power between the DR-DV5000 and the
camcorder. Connect this to the equivalent
connector on the rear of your camcorder.
FireStore DR-DV5000 User Guide
PAGE 9