Filter
Top Products
To exit from the warning screen, press either
NO or EXIT. To begin the format, press the
YES key.
FireStore DR-DV5000 utilizes a FAT32 format
type. If you are using a non-FAT32 formatted
drive, see the section on Partitioning a
volume. Once complete, the disk drive is
ready for use with DR-DV5000. It is advised
that the drive be formatted before a new
record session is begun.
Partition Volume
When an unknown or blank volume type
(HDD) is connected to DR-DV5000, the
Partition process puts a FAT32 format onto
the drive. It will erase any previous partition
and data.
To exit from partition, press either NO or
EXIT. To continue with partition, press the
YES key.
WARNING: PARTITION ERASES ALL
DATA ON THE DISK DRIVE!
Once complete, the disk drive is ready for use
with DR-DV5000.
Repair Disk
REPAIR allows the user to select either
CHECK DISK or CURRENT CLIP.
CHECK DISK scans the entire volume for any
errors (usually, if a disk was corrupted during a
recording due to sudden power loss, check disk
will alert the user of this). To exit check disk,
press either NO or EXIT.
FireStore DR-DV5000 User Guide
PAGE 33