Filter
Top Products
User simply selects the Mode. Highlighted
mode is current mode after exit. Pressing
EXIT will exit back to the menu screen.
Audio Correction Settings
This menu allows the user to change the
AUDIO CORRECTION setting on DR-
DV5000. User simply selects the Mode.
Pressing EXIT will exit back to the menu
screen.
AUDIO CORRECTION modes is an
advanced feature of DR-DV5000. It is
recommended that the customer uses the
factory default settings for most operations
(Factory default is MEDIUM). Audio
Correction Mode allows the user to alter
the performance of the audio error corrector
while recording. It is useful when recording to
DR-DV5000 from tapes with lots of dropouts.
Error correction will only effect AVI 2,
Canopus AVI, Matrox AVI, QuickTime and
AVID OMF. It does not effect RawDV or AVI
1. The modes are:
OFF - No audio correction.
MEDIUM (default) - For “normal” clean
tape played back on GY-DV5000 camcorder
or other VTR with clean heads. Experiences
occasional very short audio mutes.
HIGH - For cases where there are visible
picture disturbances and likely long audio
dropouts (1/2 sec and up).
UTILITIES MENU
The UTILITIES MENU contains various
utility functions of DR-DV5000 to be set.
User simply selects the Utilities Item. Pressing
SEL will open the sub menu. Pressing EXIT
will exit back to the menu screen.
Available items in the UTILITIES MENU are:
ORGANIZE KEEP
ORGANIZE OMF
DELETE CLIP
FORMAT
PARTITION
REPAIR
FILE NAME
FACTORY RESET
Organize Keeper Clips
Places all files that were identified as a
KEEPER clip during recording or playback
into a folder marked KEEPER on the disk
drive. This folder can be imported directly
into most DV NLE bins.
FireStore DR-DV5000 User Guide
PAGE 31