Filter
Top Products
FS-2/2E Functions
FS-2/2E Studio DTE Disk Recorder User Guide
38
2.5.5 Control Mode Menu
1. Select the Control mode. The highlighted mode is the current mode
after exit.
2. Press EXIT to return to the menu screen.
Control Mode has the following functions:
•LOCAL
•REMOTE
•AV/C
• SYNCRO SLAVE
2.5.5.1 Local
Select these options to control the FS-2/2E from the front panel
buttons only. You can also control the FS-2/2E with the optional
wired remote control unit (ACSS-0019-01). This can be purchased
at the Focus Enhancements online store,
https://www.focusinfo.com/webstore/webstore.asp.
This sub-menu contains the following selections:
•
Normal Mode - default - In this mode, recordings are
captured to a single base file until STOP is triggered, or the
nine minute file size limit is reached.
•
Index at TC - In this mode, recordings are continuous until a
break in the incoming timecode stream is detected, or the
nine minute file size limit is reached. At that time, a new file
is automatically created. No frames are lost during the
transition to a new clip.
LOCAL
REMOTE
AV/C
SYNCRO SLAVE
EXIT
SEL
NORMAL
INDEX AT TC
INDEX AT SCENE
EXIT