Filter
Top Products
106
DISCONNECTING THE CAMERA FROM YOUR COMPUTER
●
!
Do not remove the SmartMedia or disconnect the
USB cable without following the removal/
disconnection procedure described above.
Always take the following steps before
disconnecting the camera from your computer:
➀
Check that the indicator lamp is green (the
camera is not exchanging data with the
computer).
➁
Select the correct procedure below for the
operating system used on your computer.
Then proceed to step
➂
on the right side of
this page.
●
Windows 98
Check that the indicator lamp is green.
●
Windows Me/2000 Professional
Exit “FinePixViewer”. Then click the Eject
icon in the taskbar and eject the media.
Check that the “REMOVE OK” message is
displayed.
●
Macintosh
Quit “FinePixViewer”. Drag the “Removable
Drive” icon to the Trash and check that
“REMOVE OK” is displayed on the camera’s
screen.
➂
Switch the camera off.
➃
Disconnect the special USB cable from the
camera.
●
➂
●
➃