Filter
Top Products
22
SETTING THE DATE AND TIME
1
➀
Set the Mode switch to “1”
➁
Set the Mode
dial to “`”. The SET–UP screen appears on
the monitor.
➀
Use “a” or “b” to select “DATE/TIME”.
➁
Press “c”.
●
!
See P.95 for more information on the “`” (setup)
menu.
●
!
If at least 3 hours have passed since the AC power
adapter was connected or the battery inserted and
date and time set, then those settings will be
maintained for roughly 1 hour even when the camera
has no power supply (when the AC power adapter is
disconnected and the battery is removed).
2
If the date was cleared and you selected “SET
DATE/TIME”, proceed from step . (➡P.23)
3
●
➁
●
➀
●
➀
●
➁