3
75
MODE SELECT
F
ISO
AUTO
3 4
Select “9 • 0 • -” (➡P.44) or “3” (➡P.46).
However, the use of “-” or “3” mode is
recommended.
When you are using an external flash, always
specify a fixed aperture setting.
External Flash Settings
For external flash, refer to the user’s manual for the
flash and specify the settings as described below.
●
Match the settings to the camera aperture
setting. In “9” or “0” mode, match the settings
to the aperture measured by the camera.
●
Match the sensitivity setting (➡P.70) to the
setting on the camera.
●
Select External Flash mode (TTL mode cannot
be used).
●
!
Flash photography cannot be used when continuous
shooting (
➡P.61) or auto bracketing (➡P.70) is
selected.