Filter
Top Products
27
2
26
DIGITAL ZOOM
Q
MODE
You can use the digital zoom function for only
“1M” “0.3M” quality settings. Note that the digital
zoom only functions when you use the LCD
monitor to take shots.
To zoom in on your subject, press “a”
(
}
TELE). To zoom out, press “b” (
{
WIDE).
●
!
You cannot use the digital zoom for “2M
•
F” or
“2M
•
N”.
●
!
See P.36 for information on changing the quality
setting.
A “zoom bar” appears on the LCD monitor.
hDigital zoom focal distance (35 mm camera
equivalent)
1M: Equivalent to approx. 36 mm to 45 mm
Max. zoom scale: 1.25×
0.3M: Equivalent to approx. 36 mm to 90 mm
Max. zoom scale: 2.5×
1
Zoom bar
2
E MACRO
(
CLOSE-UP
)
PHOTOGRAPHY
Q
MODE
Selecting Macro mode allows you to take close-
up shots. If the flash is set to “AUTO” or “n”
Red-eye Reduction mode, it is automatically set
to “b” Suppressed Flash mode.
●
Effective Photography Range:
Approx. 8 cm to 13 cm (3.1 in. to 5.1 in.).
●
!
Using the camera width (about 10 cm or 4 in.) as a
guide, ensure that the distance to the subject is
between 8 cm and 13 cm (3.1 in to 5.1 in.). The camera
will not focus on subjects outside this focal range.
●
!
To use the flash, select the “c” Forced Flash or “v”
Slow Synchro setting in the menu screen (➡P.37,
39). However, you may not be able to obtain the
correct brightness (exposure) for your shot.
●
!
When shooting in dark conditions, use a tripod to
prevent camera shake.
●
!
The LCD monitor automatically switches on.
●
!
You cannot switch the LCD monitor off.
●
!
When you cancel Macro mode, the LCD monitor
remains on.
1Set the Mode switch to “Q”.
2To switch to Macro mode, slide the Macro
selector switch towards the Macro icon until it
stops.
“E” : The “E” icon appears on the LCD monitor
and you can take close-up shots.
“,” : Macro mode is cancelled and the camera
is ready for normal shooting (➡P.21).
If you use the viewfinder to take a picture in
Macro mode, the field visible through the
viewfinder does not match the field actually
photographed because the viewfinder and lens
are in different positions. Accordingly, you
should use the LCD monitor to take pictures in
Macro mode.
01 02