Filter
Top Products
DIGITAL
(
USB
)
socket
5
8786
USB CONNECTION/DOWNLOADING DATA
USB CONNECTION/REPLACING SmartMedia
TM
➀
Plug the small pin on the special cable into
the Digital (USB) socket on the camera, and
➁
plug the other end of the cable into the USB port
on the PC. When you switch the PC on, “”
appears on the LCD panel.
●
!
Use only the special cable provided.
●
!
Refer to the “Quick Start Guide” provided with the
camera for information on installing and using the
software.
When the viewfinder lamp is orange, this
indicates that the camera is being accessed
(data is being downloaded). Never open the
battery cover, disconnect the cable or press any
of the camera buttons when the camera is being
accessed.
32
●
!
To play back a movie on your personal computer,
software such as QuickTime 4.0 is required. You
should also copy the movie file to your hard disk
before playing it back.
●
!
Refer to the “Quick Start Guide” provided with the
camera for information on downloading audio data.
●
On Windows 98
Check that the viewfinder lamp is green.
●
On Windows 2000 Professional
Check that the viewfinder lamp is green and
then click on the Eject button in the taskbar.
●
On a Macintosh
Check that the viewfinder lamp is green and
then drag the “Removable drive” icon on the
desktop to the Trash.
Switch the camera off and replace the
SmartMedia.
●
!
After you replace the SmartMedia, switch the
camera back on and then reconnect the camera to
the personal computer.
●
➀
●
➁