Filter
Top Products
103
Warning Displayed
Remove the protection.
• If the shot is too dark, move at least 1.5 m
away from the subject and try again.
• Use AF lock to take the picture.
Explanation Remedy
X AF
A protected frame was erased.
The AF (auto focus) cannot work
effectively.
The shot can be taken, but the exposure will
not be correct.
X AE
Outside the AE continuous range.
Set the flash to Forced Flash mode or use a
tripod.
There is a strong likelihood of
camera shake because the
shutter speed is slow.
An attempt was made to playback
a frame not recorded on this
camera.
Images cannot be played back.
102
Explanation Warning Displayed Remedy
Warning Displays eThe table below lists the warnings that are displayed on the LCD monitor.
The camera battery is low on
charge.
No SmartMedia is loaded, or it is
loaded incorrectly.
The SmartMedia is not formatted.
Replace or recharge the battery.
Load a SmartMedia or reload the SmartMedia
the correct way round.
Format the SmartMedia.
• The SmartMedia terminals are
soild.
• The SmartMedia is damaged.
• The SmartMedia format is
incorrect.
Wipe the contact area on the SmartMedia with
a soft dry cloth. It may be necessary to format
the SmartMedia. If the error message is still
displayed, replace the SmartMedia.
The SmartMedia is fully recorded. Erase some images or use a SmartMedia that
has ample free space.
The SmartMedia is write-protected. Use a SmartMedia that is not write-protected.
FILE LIMIT
The frame number has reached
999-9999.
Switch the Frame NO. Memory function off and
use a formatted SmartMedia to take the picture.
DPOF SPECIFIED.
ERASE OK?
When you erase the image, the DPOF settings
for that image are deleted at the same time.
The image you tried to erase has
a DPOF print setting.
Press the MENU/OK button to create a new
DPOF file and specify all the DPOF settings
again.
The DPOF file contains an error.
Alternatively, the DPOF file was
set up on a different device.
Prints were specified for more
than 1000 frames in the DPOF
frame settings.
The maximum number of frames for which prints
can be specified on the same SmartMedia is 999.
• The lens cover is not open.
• Camera malfunction or fault.
Switch the camera on again, ensuring that you
are not touching the lens cover at the time.Switch
the camera off and then on again a few times.
PROTECTED FRAME