Filter
Top Products
30 31
Advanced
Features
2
1Press “d” or “c” to select “U” DPOF ALL RESET.
2Press the “MENU/OK” button.
1Slide the Power switch to the side to turn the
camera on.
2Set the Mode dial to “w”.
3Press the Photo mode (p) button.
3
A confirmation screen appears.
To reset all the DPOF settings, press the
“MENU/OK” button.
01 02
1
01
03
02
4
1Press “d” or “c” to display the frame for which
you want to specify DPOF settings.
2Press “a” or “b” to set a value up to 99 as the
number of copies of the frame to be printed. For
frames (files) that you do not want printed, set
the number of prints to 0 (zero).
To specify more DPOF settings, repeat steps 1
and 2.
●
!
You can order prints of up to 999 image frames on the same xD-
Picture Card.
●
!
DPOF settings cannot be specified for movies.
●
!
By selecting the “WITH DATE” setting, you can have the date
imprinted on your shots when you use the Print Service or a
DPOF-compatible printer. (Depending on the printer
specifications, the date may not be printed in some cases.)
5
Always press the “MENU/OK” button when you
complete the settings.
If you press the “BACK” button, no DPOF settings
are specified.
01 02
3
1Press “a” or “b” to select “WITH DATE” or
“WITHOUT DATE”. If you select “WITH DATE”,
the date is imprinted on your prints.
2Press the “MENU/OK” button.
01 02
If you press the “BACK” button during the settings,
all the new settings are cancelled. If there were
previous DPOF settings, only the modifications are
cancelled.
◆
When DPOF settings were specified on another camera
◆
When the data includes a frame with DPOF setting
that were specified on another camera,
“
¥” is displayed.
Pressing the “MENU/OK” button erases all of the
DPOF settings already specified for each frame. You
must then specify the DPOF setting for each frame
again.
●
!
Press the “BACK” button to leave the previous settings
unchanged.
●
!
During playback, check that the “u” is displayed for the
previous settings.
Setting for
that frame
Total number
of prints
◆
Cancelling a frame
◆
To cancel the DPOF setting for a frame you have
specified (cancel frame), perform steps
1 to 3 and
then 1 press “d” or “c” to select the frame with
the DPOF setting you want to cancel and then 2
set the number of prints to 0 (zero). To cancel the
DPOF setting for another frame, repeat steps 1
and 2. When you have completed the settings,
you must press the “MENU/OK” button.
u DPOF SET FRAME
pPHOTO MODE PLAYBACK
U DPOF ALL RESET
pPHOTO MODE PLAYBACK